Description
Tab panes
This cable plugs into the original car radio to give a break out in the antenna to DIN.
Normally used with item 21-118 and either a FM Modulator for iPod or DAB radio.
What is the loose Blue wire for? Connect the crimp connector (on the blue wire) to the blue antenna turn on wire, or the blue/white remote turn on wire coming from the new aftermarket radio harness. If neither of these are available then you will need to cut off the crimp connector and splice the wire into the Blue or Blue/white on the radio harness. Use a T Tap style connector or solder the wires together. Trouble shooting I have poor FM reception Check that the adapter is securely connected to the original ISO connection in the car, they can come apart if they get caught when installing the new radio into the dashboard. I have no sound Some cars also need the remote turn on wire for waking up an original amplifier. If there is no sound then make sure that the remote on is connected through to the car as well as to the bullet connection. PLEASE NOTE: If you have needed to make your own connection for the remote turn on wire then make sure that the connection is secure and that 12v is output when the radio is on.
Brand: InCarTec
Car models: The years stated refer to the model’s years of manufacture, please check the item description for information about any changes there may be within these productions years.
Chevrolet – City Express (2014 – 2018)
Nissan – 370Z Coupe, Roadster (2009 – 2021)
Nissan – Cube (2010)
Nissan – Leaf (2011 – 2017)
Nissan – Maxima (2009 – 2014)
Nissan – Micra K13 (2010 – 2017)
Nissan – Murano 2nd Gen (Z51) (2008 – 2014)
Nissan – Navara (D40) (2005 – 2016)
Nissan – Note (2006 – 2013)
Nissan – NV200 (2010 – 2019)
Nissan – Pathfinder R51 (2005 – 2013)
Nissan – Patrol Y62 (2011 > )
Nissan – Qashqai 1st Gen (J10) (2007 – 2013)
Nissan – Wingroad / AD (Y12) (2005 – 2018)
Nissan – X-Trail 2nd Gen (T31) (2007 – 2014)
Reviews
There are no reviews yet.